Action Items

One working list for the follow-up tasks people create from AI outputs across Aegis — open it from the left menu, filter it by status, give each task an owner and a due date, and move it forward one step at a time.

Many of the AI actions (analyses the AI runs on your data, always at a person's request) end with a finding that someone has to act on: a control that has never been implemented, a critical vendor that needs reassessing, a policy that is overdue for review. When you decide a finding is worth tracking, you turn it into an action item. This chapter shows where those items land and how to work them.

Action Items is no longer a page of its own. It is now a tab on the Roadmap page, so all forward-looking work — programmes, projects, proposals and these follow-up tasks — sits in one destination. The menu entry and the old /action-items address both open /compliance/roadmap with the Action Items tab already selected, so old links and bookmarks keep working.

Who uses it

Every signed-in role reaches the tab; the difference is what you may do once you are there. The screenshot below was captured as a Contributor, which is why each card carries a pencil icon but no bin icon.

What's on this screen

The page opens with the heading Compliance Roadmap. Under it runs the Roadmap tab strip: Portfolio, Board, Kanban, Gantt, Proposals, Action Items, with the active tab underlined in blue. The Action Items tab has no create button of its own.

Directly under the tab strip sits a second, smaller row of four status filters: All, Open, In progress and Done. The selected filter is underlined in the same blue. Below that is the list itself. Each action item is one bordered card holding:

On the captured screen most items are at Open and one, further down, is at In progress with its amber circle. Under the last card a count line — Showing 1 to 20 of … action items — and page controls let you move through the rest; they sit below the part of the page the screenshot shows. There is no search box, no sort control and no column headings.

Working through the list

  1. In the left menu, open the Governance group and select Action Items. Aegis opens the Roadmap page. (In the capture the menu groups are collapsed, so the entry itself is not visible.)
  2. Check that the Action Items tab at the top is the underlined one. It is selected for you whenever you arrive from the menu — even if you had switched to another Roadmap tab — and the Action Items menu entry, not Roadmap, is the highlighted one. Selecting another tab updates the address, so a copied link reopens that tab.
  3. Use the status filters to narrow the list — Open for untouched items, In progress for work someone has started, Done for finished ones, All to see everything. The list refreshes as soon as you select a filter and starts again at page one.
  4. Read the cards. The detail line under each title tells you the status, the owner and due date where they exist, and which AI action raised the item — enough to decide what to do next without leaving the tab.
  5. When you have acted on an item, select its status circle to advance it one step. Open becomes In progress, and In progress becomes Done. The icon, the colour and the status word all update on the card as soon as the change is saved.
  6. To hand the item to someone or give it a deadline, select the pencil icon at the right of the card. An editor opens inside the card, under the detail line — the section Assigning an owner and a due date below walks through it.
The Action Items tab of the Roadmap page as a Contributor — the Roadmap tab strip, the status filters, the card list, the status circle that advances an item and the pencil that assigns it. /compliance/roadmap?tab=action-items.
The Action Items tab of the Roadmap page as a Contributor — the Roadmap tab strip, the status filters, the card list, the status circle that advances an item and the pencil that assigns it. /compliance/roadmap?tab=action-items.
One select, one step

The status circle always moves an item exactly one step. There is no drop-down that jumps from Open straight to Done — an item passes through In progress on the way. Selecting the circle on a Done item cycles it back to Open, which is how you reopen something that was closed too early. If the change cannot be saved, Aegis shows Could not update the action item and the card keeps its previous status.

Assigning an owner and a due date

An item raised from an AI result often starts with no owner and no due date. The pencil icon on each card lets a Contributor, Manager or Admin set both, or change them later.

  1. Select the pencil icon at the right-hand end of the card. A small editor opens inside the card with two fields: Owner, a drop-down of the people in your organisation (with No owner at the top), and Due date, a date picker. Both start with the item's current values.
  2. Choose the owner and pick the date. To clear either, choose No owner or empty the date field.
  3. Select Save. Aegis confirms with Action item updated, the editor closes, and the detail line shows the new owner and Due … date. If the save fails, Aegis shows Could not update the action item and the editor stays open. Cancel — or selecting the pencil again — closes the editor without saving.

When you make someone else the owner, they receive a notification headed An action item was assigned to you, delivered through their own notification channel and digest settings. Assigning an item to yourself sends nothing. Once an item has a due date, it is also covered by the deadline reminders Aegis sends when follow-up work is due soon or overdue.

When the list is empty

The tab tells you plainly which kind of empty you are looking at, and how to get out of it.

Where action items come from

Action items are created inside AI results, not on this tab. Run an AI action from the record it belongs to — a framework's control gaps, a vendor portfolio, a risk — and the result gains a small row of follow-up buttons underneath it.

  1. Run the AI action and read the result. Under the output, select Create action item.
  2. A small panel opens in place, headed New action item from this output, with a title box (What needs to be done?) and a description box (Details (prefilled from the AI output — edit as needed)). Only the description is pre-filled — Aegis copies the AI output into it. The title starts empty; write the task yourself, as an instruction to a colleague.
  3. Select Create action item in the panel. The button stays inactive until the title box has text in it. It reads Creating… while it saves, then Aegis confirms with Action item created — find it under Action Items. The new item appears on this tab at status Open, carrying the name of the action that raised it. Cancel closes the panel without creating anything.

Some AI actions return a list of findings rather than one block of text. Those show a panel headed Create action items from these findings with a tick box beside each proposed finding: tick the ones worth tracking and select the create button, whose label counts your ticks — Create 3 action item(s) for three. Aegis then reports how many it created, and says so plainly when only some worked — Created 3 of 5 action items. The optimisation plan on a security process works the same way: each proposed improvement can become a tracked item linked back to that process.

The panel on a record

Records that AI actions have run against also carry a small panel of their own, headed Action items. It shows only the items raised from that record — the same items you see on this tab, narrowed to one place — so you can pick up the follow-up while you are reading the record. The panel has no status filters, but its status circles, pencil and bin icons work exactly as they do here. Page controls appear on the panel only once it holds more than one page of items.

Deleting an item

  1. As a Manager or Admin, select the bin icon at the right-hand end of the card.
  2. A confirmation window opens, headed Delete action item, asking Delete "…"? This removes it from the list. with the item's title in the quotes.
  3. Select Delete to remove the item, or Cancel to keep it. On success the card disappears from the list and Aegis shows Action item deleted; on failure it shows Could not delete the action item and the card stays.

Status reference

Status Circle Meaning
Open Empty grey circle Raised but not started.
In progress Amber circle with a centre dot Someone is working on it.
Done Green tick, title struck through Finished. Advancing a done item reopens it.

The AI assist

The AI never puts an item on this list by itself. An AI action may propose follow-up work, but nothing is tracked until a person reads the output, writes or confirms the wording and chooses to create the item. Owners and due dates are set by people, not by the AI. Each item keeps the name of the action that produced it — Control gap smart triage or Policy staleness triage on the captured screen — so the reasoning behind the task stays traceable months later. The AI assists; the person reviews and decides.

Tips and limits

Where this connects