Questionnaires

Hold the security questionnaires you receive and the ones you send, import a supplier's spreadsheet, answer question by question, route a questionnaire to a colleague or a vendor, review what vendors send back, and export the finished answers.

A questionnaire is a structured list of questions, usually about security or compliance. Two situations call for one. Inbound: a customer or an auditor sends you a long list of questions about your controls. Outbound: you are assessing a supplier. Aegis stores each question with its text, an optional category and an optional answer, counts a completion figure as you go, tracks who owns the questionnaire and who it has been routed to, and exports the set to a spreadsheet.

A licensed module

Questionnaires are gated behind the QUESTIONNAIRE_AUTOMATION licence flag, and the QUESTIONNAIRES module has to be provisioned for your tenant. If the licence flag is not in your plan, /questionnaires shows a short “not available” message instead of the table. The AI actions further down need the separate AI_ASSIST flag as well.

Who uses it

Recording the final decision on a vendor's submitted response is narrower still: by default only an Admin holds it, because the decision creates evidence. A Manager reviews but does not decide, unless a permission group grants the decision as well.

What's on this screen

Open /questionnaires from the Compliance group in the left menu. The header reads Questionnaires over the line Build questionnaires, send them to vendors and review the answers. Beneath it sit four tabs — Templates, Campaigns, All responses and Review inbox. A bare /questionnaires opens on All responses, the list of every questionnaire; the chosen tab is kept in the address, so a tab can be bookmarked and survives a reload. For a reviewer the Review inbox tab carries a small count of responses waiting for review.

On All responses, three buttons sit at the right above the table: Sync now, Import and the dark primary Create Questionnaire. Below them is the filter bar — a Search questionnaires... box, a Search button, and the All Statuses and All Follow-up Statuses dropdowns. The table carries Title, Source (with a Connector chip on synced rows), Status, Follow-up status, Owner, Assigned to, Questions and Created, twenty rows to a page. On the captured screen the list holds a mix of sources — imported SIG and CAIQ questionnaires, a manual one, a customer request and several that arrived through a vendor campaign — in Draft, In Progress and Completed, with follow-up states from None through Pending response to Resolved. A dash in Assigned to means the questionnaire has not been routed to anyone.

  1. Select Sync now to ask a connected source for questionnaires. It works only once a connected SharePoint connector has an enabled Questionnaires sync schedule. Until then the button is greyed out, as on the captured screen, and hovering over it explains No questionnaire sync is configured. Connect a SharePoint connector and add a Questionnaires sync schedule first. With a schedule, Aegis queues the import, confirms Questionnaire sync queued and refreshes the list a moment later.
  2. Select Import to upload a supplier's spreadsheet. A dialog opens where you pick the format and let Aegis parse the questions.
  3. Select Create Questionnaire to start an empty one by hand. A small dialog opens over the table.
  4. Type in the search box to narrow the table to matching titles, then set either dropdown to narrow it further. The status dropdown offers Draft, In Progress and Completed; the follow-up dropdown offers all five follow-up states. Select any row to open its detail.
The All responses tab — the three header actions, the search box and status filters, and the questionnaire table — /questionnaires.
The All responses tab — the three header actions, the search box and status filters, and the questionnaire table — /questionnaires.

With nothing created yet, the table area reads Nothing here yet — No items have been created yet. Create, import or sync a questionnaire and rows replace it.

Creating a questionnaire by hand

The create dialog is deliberately small: a title and an optional source label, nothing more. Use it to start an outbound assessment and add or import the questions afterwards.

  1. Select Create Questionnaire in the header. The page dims and a dialog opens in the centre.
  2. The dialog is titled Create Questionnaire and holds two fields — Title, marked with a red asterisk because it is required, and Source — above Cancel and Create.
  3. The × in the corner closes the dialog, as does Cancel. Nothing is saved.
  4. Type a clear Title — the placeholder shows the shape, e.g. ISO 27001 Vendor Assessment — and, optionally, a Source; its placeholder reads Optional — e.g. vendor name or framework. Select Create: the dialog closes and the questionnaire appears in Draft with no questions yet. Leave the title blank and the field turns red with Title is required.
The Create Questionnaire dialog — a required Title, an optional Source, and Cancel and Create — /questionnaires.
The Create Questionnaire dialog — a required Title, an optional Source, and Cancel and Create — /questionnaires.

Importing a questionnaire from a spreadsheet

Import reads a supplier's own spreadsheet and creates a draft with the questions loaded, so you need not reshape the columns first.

  1. Select Import. The Import Questionnaire dialog opens.
  2. Choose the Format that matches your file: Generic (xlsx/csv) for a question-per-row layout, SIG (Standardized Information Gathering) for the Shared Assessments questionnaire, or CAIQ (Consensus Assessments Initiative) for the Cloud Security Alliance one.
  3. Choose the File — .xlsx or .csv, up to 10 MB. Optionally set a Title; leave it blank and Aegis names the questionnaire after the file.
  4. Select Import. Aegis parses the file, creates the questionnaire in Draft with its questions, and confirms. If your file has a Required or Mandatory column, a second note tells you that column is not stored and was ignored.

The import dialog was not captured for this edition, so there is no figure of it. An imported questionnaire keeps the name of its file: the detail view shows it as Source File.

Opening and reading a questionnaire

Selecting a row opens the detail over the list, titled with the questionnaire's name. At the top sit the status badge and, once there are questions, a completion line — the captured screen shows 0/18 answered (0%) on a freshly imported SIG questionnaire — with the action buttons along the right. Overview follows with the Source, the number of Questions, the Source File for an imported one, Created By, the Owner, who it is Assigned to and when it was forwarded, and the Follow-up status; a synced questionnaire also shows its connector and last-synced time. Questions lists each question with its number (Q1, Q2…), its text and an optional category chip such as Governance. An answer appears in a green panel labelled Answer:, with a confidence figure on AI drafts; a response that came back from an outside recipient appears separately, in a blue-bordered panel labelled Original external response:. Metadata at the bottom shows the created and last-changed times.

The capture shows the detail as a Contributor sees it: Owner and Follow-up status are plain text, and only the export buttons and Review readiness appear. A Manager or an Admin sees more buttons in that row — described in the sections below.

  1. Select Export Excel to download the questions and answers as an .xlsx file. The button reads Exporting... while the file is built, then the browser downloads it.
  2. Select Export CSV for the same content as a .csv file.
  3. Select Review readiness to see which questions still need attention before the questionnaire goes back. A dialog opens with the narrative; The AI assist below explains it.
  4. Check Assigned to to see who the questionnaire has been routed to. A dash means nobody yet; after a forward, the recipient's name appears with the forwarding time underneath.
  5. Select Close at the bottom, or the × at the top. You return to the table with your filters intact.
A questionnaire's detail as a Contributor sees it — status and completion, Export Excel, Export CSV and Review readiness, the Overview fields and the first questions — /questionnaires.
A questionnaire's detail as a Contributor sees it — status and completion, Export Excel, Export CSV and Review readiness, the Overview fields and the first questions — /questionnaires.

Exporting the questions and answers

Anyone who can read a questionnaire can export it, once it has questions — the export buttons appear only then. The export includes the original external response separately from the current review draft. Human edits do not erase that original response.

Answering the questions

With the update permission — Manager and Admin — every question carries its own answer box. It is not shown to a Contributor or a Viewer, which is why the captured detail has none.

  1. Scroll to Questions. The list scrolls inside its own panel, so a long questionnaire does not push the rest of the detail off screen.
  2. Type into the answer box under a question; the placeholder reads Enter your answer…. If the question already has a draft, the box starts with it.
  3. Select Save answer. The button reads Saving…, then Aegis confirms, the answer appears in the green panel, and the completion figure at the top moves up. Saving by hand records you as the person who reviewed that answer.

The two status cycles

Each questionnaire carries two independent statuses — two columns in the table, two dropdowns in the filter bar. The answering status tracks how far the answers have come: Draft (created, imported or synced), In Progress (some answered), Completed (all answered and reviewed) and Archived (kept for reference; forwarding and the AI drafting actions are hidden in this state). The status filter in the list offers the first three only.

The follow-up status tracks a questionnaire you have routed to someone else. It moves one step at a time, with a step back allowed for correction, so the dropdown only ever offers the moves valid from where you are now.

Follow-up status Can move to
None — no follow-up in progress (the default) Pending response, In review
Pending response — routed, awaiting their answers In review, Escalated, Resolved, None
In review — answers received and being checked Pending response, Escalated, Resolved
Escalated — review stalled and raised for attention In review, Resolved
Resolved — the follow-up is complete In review

Changing the owner and the follow-up status

Both live in Overview in the detail view, and both are dropdowns for a Manager or Admin and plain read-only text for everyone else.

  1. Open the questionnaire and find Owner in Overview. The dropdown lists Aegis users; pick one and Aegis saves the transfer and confirms.
  2. Open the Follow-up status dropdown beside it. It shows the current value and only the moves allowed from it — the table above lists them. Pick one and Aegis records the move and confirms.
  3. Close the detail view. The Owner and Follow-up status columns in the table show the new values.

Forwarding to a colleague or a vendor

With the forward permission, the detail view shows a Forward button — hidden once the questionnaire is archived.

  1. Select Forward. The Forward Questionnaire dialog opens with a Forward to choice of Aegis user or External email.
  2. For a colleague, keep Aegis user, search by name or email and pick someone. For a supplier, switch to External email and enter the recipient's email and, optionally, their name.
  3. Add an optional message of up to 500 characters and select Forward. The recipient becomes Assigned to, the follow-up status moves to Pending response, and the time is recorded.

An external recipient gets a one-time link to a page outside the application — no sign-in, no menu, nothing but the questionnaire. The link is used up only after at least one matching answer has been saved. An empty or mismatched submission leaves the link available for correction. An invalid, expired or already-used link shows the same neutral “link unavailable” page, so it never reveals which it was, and search engines are told not to index it.

The link travels by email. If email delivery is not configured, or the message cannot be delivered, the questionnaire is still forwarded but Aegis warns that the vendor has not been notified; forward again once email works. The forward dialog was not captured for this edition.

Deleting a questionnaire

With the delete permission — a Manager or an Admin — the detail view shows a red Delete Questionnaire button. Select it and confirm Are you sure you want to delete this questionnaire? with Delete. The questionnaire is removed together with its questions and answers, the detail closes and the list refreshes.

The AI assist

Where AI Assist is licensed, the detail view offers three actions.

AI Autofill and Regenerate answers need the update permission and are hidden on an archived questionnaire; Review readiness needs only read access. All three appear only once the questionnaire has questions. Regenerate answers is also withheld once any question holds an external response, and on a questionnaire forwarded to an external email whose follow-up has reached In review or Resolved.

Always read the drafts before they leave the building

Suggested answers are drafts drawn from your own records. They change no policy and no other record, and Aegis never sends a questionnaire to a customer or a vendor on its own. A person reads each answer, corrects it and decides what is appropriate to share — most carefully for a low-confidence answer headed to an outside party.

Templates for the questionnaires you send

The Templates tab holds the questionnaires you write once and send to many vendors. A template is a Draft while you write it, Published once it is locked and can be sent, and Archived once a newer version replaces it or a Manager archives it. The template screens were not captured for this edition.

  1. Select New template on the Templates tab. The builder opens with the sections on the left, the questions of the selected section in the middle and the properties of the selected question on the right.
  2. Give each question an answer type — Yes / No, Single choice, Multiple choice, Free text, Number, Date or Attachment — and set Required, Evidence required, the Weight (1–5) and the Expected answer. A choice question needs at least two options, one per line.
  3. Use Import questions to append the questions of an .xlsx or .csv file, Add from bank to copy reusable questions from the question bank, and Save to bank to keep a question for later. A copy taken from the bank never changes when the bank does.
  4. Select Preview portal to see the questionnaire as a vendor will, then Save draft.
  5. Select Publish. Aegis refuses while the template has no questions, a question has no text or answer type, or a choice question has fewer than two options, and highlights the questions to fix. A published version is locked; New version copies it into a new draft, and publishing that draft archives the old version.

Anyone who can create questionnaires can write a draft. Publishing, starting a new version and sending need a Manager or an Admin.

Two controls retire a template. On a Published template, a Manager or an Admin can select Archive and confirm: the version can no longer be sent to vendors, but campaigns already sent from it stay readable. On a Draft, anyone who holds the delete permission — a Manager or an Admin — can select Discard draft, either in the builder or in the last column of the template's row on the Templates tab, and confirm Discard draft?. A discarded draft is gone for good and cannot be undone. Published and archived versions are records and are never discardable.

Drafting template questions with AI

Where AI Assist is licensed, a draft template shows Draft with AI and, once it has questions, Check questions.

A source is always a record in your own tenant, shown with the reference and title your framework catalogue holds. A draft from ISO 27001 with the theme supplier can cite A.5.19 Information security in supplier relationships; a draft from NIS2 can cite NIS2-SC-1 Supply Chain Security, the directive's Article 21(2)(d). These are examples — your proposals cite whatever controls your frameworks hold. When nothing fits, Aegis proposes nothing and says why, and a proposal without a source reads No source found. Check this question yourself before you use it.

Sending a template to vendors

On a published template, Send to vendors opens a three-step wizard. Under Recipients, choose one vendor, a selection filtered by criticality, data classification and last assessment, or all active vendors; a vendor without a primary contact is skipped. Under Settings, set the deadline, the days between reminders, how long the link stays valid and a message to the vendor. Review and send then creates one request and one link per vendor and reports what was sent, failed or skipped. The Campaigns tab lists the campaigns you have sent, each opening its tracker.

Each request a campaign creates also appears on All responses, with campaign as its source — the captured list shows several. Unlike an inbound questionnaire, a campaign request belongs to one vendor.

Sending needs email (SMTP) and the vendor portal. Until both are available the wizard says so and sends nothing. The defaults the wizard starts from — reminders, link validity, attachment size, retention and portal languages — live in Settings → Vendor questionnaires, which only an Admin can change.

The Review inbox

The Review inbox tab lists the vendor responses that have been submitted and are waiting for a review, oldest first. Each row shows the Vendor, the Campaign, when it was Submitted, the Deadline and how many questions have been Reviewed, with a Review action. When nothing is waiting it reads No submitted answers are waiting for review. Only reviewers — a Manager or an Admin — see the list; anyone else sees a one-line note in its place. The inbox was not captured for this edition.

Reviewing a submitted response

Select Review in the inbox, or Review answers in the detail view of a campaign request, to open the review screen at /questionnaires/<id>/review. The questions are grouped by template section. For each one you see the vendor's answer and any attachments, give a verdict — Accepted, Remark or Rejected — and can write an Internal comment, ticking Share this comment with the vendor only when the vendor should read it. Every change is saved at once. If another reviewer changed the same question in the meantime, Aegis reloads the latest version instead of overwriting it.

Reviewing a submitted response with AI

Once a vendor has submitted a questionnaire, its review sheet shows an AI review assistant panel. It appears only where AI Assist and questionnaire automation are both licensed and you hold the update permission. Everything it produces is advisory — a human decides — and each run counts as an AI action against your credits.

Tips and limits

Where this connects

Questionnaires are one way to assess the suppliers you track in Vendors, and the AI drafts its answers from your Policies, control monitoring and Evidence. Files can also arrive through Connectors, and what you publish outwards sits alongside your Trust Center. For a supplier assessed end to end, see the vendor scenario; for who can do what, see Roles overview.